Publications

q Thermo-hydraulic Performance Evaluation of Radial Tree-Branching Microchannel Heat Sinks for Electronic Cooling Applications, Sangram Kumar Samal, Mohammed Qadeer, Sandip K. Saha, International Journal of Thermal Sciences, Vol. 197, 108800, 2024.

q Experimental and CFD-DEM Study on Local Packing Distribution and Thermofluidic Analysis of Binary Packed Bed, Pratyush Kumar, Sandip K. Saha, Atul Sharma, Chemical Engineering Science, Vol. 282, 119372, 2023.

q Phonon-Engineered Hard-Carbon Nanoflorets Achieving Rapid and Efficient Solar-Thermal Based Water Evaporation and Space-Heating, Ananya Sah, Sumit Sharma, Sandip Saha, Chandramouli Subramaniam, ACS Appl. Mater. Interfaces 2023 (https://doi.org/10.1021/acsami.3c09078).

q Investigation of Conjugate Effects on Forced Convection in Diamond (Diverging–Converging) Microchannels, Sandeep Goli, Sandip K. Saha, Amit Agrawal, ASME J. Heat Mass Transfer, Vol. 145(7), 072502, 2023.

q Annular Vertical Cylindrical Thermochemical Storage System with Innovative Flow Arrangements for Improved Heat Dispatch towards Space Heating Requirements, Ankush Shankar Pujari, Rudrodip Majumdar, Sandip K. Saha, Chandramouli Subramaniam, Renewable Energy, Vol. 217, 119168, 2023.

q Comparative Study of Surface Roughness Models in the Hydro-Thermal Characterization of Flow over Rough Walls, Sangram Kumar Samal, Pratyush Kumar, Sandip K. Saha, Physics of Fluids, Vol. 35, 095106, 2023.

q Comparative Study of Performance Enhancement of Latent Thermal Energy Storage System with Copper Porous Fin, C. Suresh, Sandip K. Saha, Journal of Energy Storage, Vol. 72, 108451, 2023. Exploring the Effect of Axial Wall Conduction on the Heat transfer mechanism of Hourglass Microchannels: Design Guidelines for Maintaining a Constant Wall Temperature, Sandeep Goli, Sandip K Saha, Amit Agrawal, Applied Thermal Engineering, 2023 (Accepted).

q On the Importance of Fluidic Manifold Design and Orientation on Flow Boiling Instability in Microchannel Heat Sinks, Gaurav Hedau, Mohammed Qadeer, N P Gulhane, Rishi Raj, Sandip K. Saha, International Journal of Heat and Mass Transfer, Vol. 209, 124120, 2023.

q Three-Dimensional Study of Flow Past Blunt Headed Cylinder at Low Reynolds Numbers, Ashish P. Pawar, Sandip Sarkar, Sandip K. Saha, International Journal of Thermal Sciences, Vol. 189, 108256 2023.

q Thermal Stratification Characteristics during Simultaneous Charging and Discharging for Different Storage Tank Geometries with Immersed Discharging Coil, Hitesh Khurana, Rudrodip Majumdar, Sandip K Saha, Applied Thermal Engineering, Vol. 225, 120235, 2023.

q Assessment of First Law Performance Characteristics and Chilton-Colburn Analogy in Diamond and Hourglass Microchannels, Sandeep Goli, Sandip K. Saha, Amit Agrawal, Applied Thermal Engineering, 2023 (Accepted).

q Thermo-fluidic Behaviour of Diamond and Hourglass Microchannels: Investigation from the Second Law Viewpoint, Sandeep Goli, Sandip K. Saha, Amit Agrawal, International Journal of Heat and Mass Transfer, 2023 (Accepted).

q Measurement of Shrinkage Void and Identification of Solid-Liquid Phases in Phase Change Materials: Ultrasound-based approach and Simulated Predictions, Diwakar Janghel, Shyamprasad Karagadde, Sandip K. Saha, Applied Thermal Engineering, 2023 (Accepted).

q Performance Assessment of Open Thermochemical Energy Storage System for Seasonal Space Heating in Highly Humid Environment, Ankit Mukherjee, Ankush Shankar Pujari, Shraddha Nitin Shinde, Uddip Kashyap, Lalit Kumar, Chandramouli Subramaniam, Sandip K. Saha, Renewable Energy, Vol. 201(1), 204-223, 2022.

q Study on Convective Heat Transfer of Supercritical Water in Annular Square Channel, Thamilmani Murugan, Arun K Raj, Amit Agrawal, Sandip K. Saha, Heat Transfer Engineering, pp. 1-17, 2022. https://doi.org/10.1080/01457632.2022.2162012

q Successive Solidification and Constrained Remelting of n-Octadecance in a Rectangular Enclosure: Experimental and Numerical Study, Diwakar Janghel, Shyamprasad Karagadde, Sandip K. Saha, International Journal of Thermal Sciences, Vol. 183, 107888, 2023.

q Entropy Generation Minimization-based Heat Transfer and Mass Transfer Study of Rectangular Packed-Bed Filled with Spherical Particles, Pratyush Kumar, Sandip K. Saha, Atul Sharma, Fusion Engineering and Design, Vol. 184, 113295, 2022.

q Phase Change and Heat Transfer Analysis of Different Refrigerants during Condensation in Minichannel using a Novel Numerical Approach, Sourav Pramanick, Prasenjit Dey, Sandip K. Saha, ASME J. Thermal Sci. Eng., Vol. 15(1), 011004, 2023. https://doi.org/10.1115/1.4055369.

q Development of Scaling Laws for Prototyping and Heat Loss Correlations for Upward Facing Cylindrical Helical Coil and Conical Spiral Coil Receivers, Sumit Sharma, Sandip K. Saha, International Journal of Heat and Mass Transfer, Vol. 190, 122773, 2022.

q Experimental Investigation of Heat Dispatch Controllability through Simultaneous Charging-Discharging and Stand-alone Discharging Operations in Vertical Cylindrical Sensible Heat Storage Tank, Hitesh Khurana, Rudrodip Majumdar, Sandip K. Saha, Journal of Energy Storage, Vol. 54, 105268, 2022.

q Phase Change Material Incorporation Techniques in Building Envelopes for Enhancing the Building Thermal Comfort- A Review, C. Suresh, Tapano Kumar Hotta, Sandip K. Saha, Energy and Buildings, Vol. 268, 112225, 2022.  

q Physics of Fluid Flow in an Hourglass (Converging-Diverging) Microchannel, Sandeep Goli, Sandip K Saha, Amit Agrawal, Physics of Fluids, Vol. 34, 052006, 2022.

q Development of Numerical Model to Study the Effect of Condensate Liquid Layer on Condensation Heat Transfer of R134a in Minichannel, Sourav Pramanick, Prasenjit Dey, Sandip K. Saha, Heat and Mass Transfer, Vol 58, 2029-2046, 2022.

q Dynamics of Phase Change of Gallium under Magnetic Field and Thermocapillary Effects under Variable Gravity Conditions, Sandip K. Saha, Thermal Science and Engineering Progress, Vol. 29, 101234, 2022.

q Study of Melting of Paraffin Dispersed with Copper Nanoparticles in Square Cavity Subjected to External Magnetic Field, Ashish Kumar, Sandip K Saha, K Ravi Kumar, Dibakar Rakshit, Journal of Energy Storage, Vol. 50, 104338, 2022.

q Response Surface Methodology-based Prediction Model for Working Fluid Temperature during Stand-Alone Operation of Vertical Cylindrical Thermal Energy Storage Tank, Hitesh Khurana, Rudrodip Majumdar, Sandip K. Saha, Renewable Energy, Vol. 188, pp. 619-636, 2022.

q Study of Hydrothermal Transport Phenomena and Performance Characteristics for a Flow through a Diamond (Diverging-Converging) Microchannel, Sandeep Goli, Sandip K. Saha, Amit Agrawal, Thermal Science and Engineering Progress, Vol. 29, 101195, 2022.

q Laminar Forced Convective Heat Transfer Performance Analysis of Elliptical and Semicircular Microchannels, Amol Bhosale, S.Y. Bhosale, H.N. Deshpande, Sandip K. Saha,Journal of Thermophysics and Heat Transfer, Vol. 36(4), 836-847, 2022. doi: doi/abs/10.2514/1.T6249.

q Transient Performance Analysis of a Novel Design of Portable Magnetic Refrigeration System, Uddip Kashyap, Ashish Kumar, Vishal Sardespande, Sandip K. Saha, Physics of Fluids, Vol. 34, 013611, 2022.

q Thermal and Structural Characterizations of Packed Bed Thermal Energy Storage with Cylindrical Micro-Encapsulated Phase Change Materials, Akshay Kumar, Sandip K. Saha, Journal of Energy Storage, Vol. 8, 103948, 2022.

q Study of Interactions of Sneezing Droplet with Particulate Matter in the Polluted Environment, Prasenjit Dey, Sandip K. Saha, Sandip Sarkar, Physics of Fluids, Vol. 33, 113310, 2021.

q Hydrothermal and Second Law Analyses of Fluid Flow in Converging-Diverging (Hourglass) Microchannel, Sandeep Goli, Sandip K Saha, Amit Agrawal, Heat Transfer Engineering, 2022. https://doi.org/10.1080/01457632.2022.2049561

q Study of Shrinkage Effect of Aluminium Based Binary Alloys as Phase Change Materials for Latent Heat Thermal Energy Storage Applications, Nikhil Katiyar, Sandip K. Saha, Journal of Energy Storage, Vol. 47, 103587, 2022.

q Complete Suppression of Flow Boing Instability in Microchannel Heat Sinks using a Combination of Inlet Restrictor and Flexible Dampener, Gaurav Hedau, Rishi Raj, Sandip K. Saha, International Journal of Heat and Mass Transfer, Vol. 103, 2022.

q Forced Convective Flow and Heat Transfer Past a Blunt Headed Cylinder with Corner Modification, Ashish Pawar, Sandip Sarkar, Sandip K. Saha, Physics of Fluids, 33, 103106, 2021.

q CFD Investigation of Helium Gas Flow in Sphere Packed (Pebble Bed) in a Rectangular Canister using OpenFOAM, Pratyush Kumar, Abhishek Thakur, Sandip K. Saha, Atul Sharma, Deepak Sharma, Paritosh Chaudhuri, Fusion Engineering and Design, Vol. 172, 112858, 2021.

q Hybridization of Geothermal Source with ORC-based Load Loop for Uninterrupted Generation of Steady Power, Anukool Choudhary, Rudrodip Majumdar, Sandip K. Saha, International Journal of Sustainable Energy, Vol. 41(1), 2021.

q Performance Enhancement of Tapered Helical Coil Receiver using Novel Nanostructured Carbon Florets Coating, Sumit Sharma, Ananya Sah, Chandramouli Subramaniam, Sandip K. Saha, Applied Thermal Engineering, Vol. 194, 117065, 2021.

q Performance Evaluation of a Seasonal Residential Space Heating System based on Thermochemical Energy Storage, Ankit Mukherjee, Lalit Kumar, Chandramouli Subramaniam, Sandip Kumar Saha, Applied Thermal Engineering, Vol. 194, 117059, 2021.

q A Numerical Study on Condensation Heat Transfer Characteristics of R134a in Microchannel under Varying Gravity Conditions, Prasenjit Dey, Danush Raj, Sandip K. Saha, Microgravity Science and Technology, Vol. 33(3), Article id.34, 2021.

q Evolution of Solid-Liquid Interface in Bottom Heated Cavity for Low Prandtl Number using Lattice Boltzmann Method, Md Shahzad Hasan, Sandip K. Saha, Physics of Fluids, Vol. 33, 057102, 2021.

q Effect of Outlet Plenum Design on Flow Boiling Heat Transfer in Microchannel Heat Sinks, Gaurav Hedau, Rishi Raj, Sandip K. Saha, Thermal Science and Engineering Progress, Vol. 23, 100868, 2021.

q Magnetohydrodynamic Buoyancy Driven Al₂O₃-Water Nanofluid Flow in a Differentially Heated Trapezoidal Enclosure with a Cylindrical Barrier, Sandip K. Saha, International Communications in Heat and Mass Transfer, Vol. 114, 104593, 2020.

q Coupled Computation Fluid Dynamics Models for Air Flow and Thermal Analysis of Marine Engine Room, Jithin A. George, Sandip K. Saha, ASME J. Thermal Sci. Eng. Appl. Vol. 13(5), 054501 (10 pages), 2021.

q Forced Convection Past a Semi-Circular Cylinder at Incidence with a Downstream Circular Cylinder: Thermofluidic Transport and Stability Analysis, Sandip Sarkar, Chitrak Mondal, Nirmal Manna, Sandip Saha, Physics of Fluids, Vol 3, 023603, 2021.

q Transient Thermal Analysis of Close Pressure Thermoforming Process, Jeet P Patil, Vilas Nandedkar, Sushil Mishra, Sandip K. Saha, Journal of Manufacturing Processes, Vol. 62, 513-522, 2021.

q Comparative Evaluation of Circular Truncated-Cone and Paraboloid Shapes for Thermal Energy Storage Tank based on Thermal Stratification Performance, Hitesh Khurana, Saurabh Tiwari, Rudrodip Majumdar, Sandip K Saha, Journal of Energy Storage, Vol. 34, 102191, 2021.  

q Performance Study of a Novel Funnel Shaped Shell and Tube Latent Heat Thermal Energy Storage System, Ashish Kumar, Sandip K Saha, Renewable Energy, Vol. 165, 731-747, 2021.

q Performance Analysis of a Packed Bed Latent Heat Thermal Energy Storage with Cylindrical-shaped Encapsulation, Akshay Kumar, Sandip K. Saha, International Journal of Energy Research, Vol. 45(9), 13130-13148, 2021.

q Fluid Flow and Heat Transfer in Microchannel with Porous Bio-inspired Roughness, Prasenjit Dey, Sandip K. Saha, International Journal of Thermal Sciences, Vol. 161, 106729, 2021.  

q Study of Effect of Magnetic Field on the Axisymmetric Vortices Produced by a Novel Vortex Generator in a Rectangular Channel using Dynamic Mode Decomposition, Uddip Kashyap, Ashish Pawar, Sandip K. Saha, Physics of Fluids, Physics of Fluids, Vol. 32, 115111, 2020.

q A Novel Method for Discontinuity Detection in Pipelines Carrying Oils and Gases, Uddip Kashyap; Sandip K Saha, Journal of Pipeline Systems, Vol. 12(1), 2021.

q Study of Bubble Growth and Microchannel Flow Boiling Heat Transfer Characteristics Using Dynamic Contact Angle Model, Ayyaz Siddique, Arivazhagan Gb, Amit Agrawal, Sandip K. Saha, Atul Sharma, Thermal Science and Engineering Progress, Vol. 20, 100743, 2020.

q Computational Study of Performance of Cascaded Multi-layered Packed-bed Thermal Energy Storage for High Temperature Applications, Rudrodip Majumdar, Sandip K. Saha, Journal of Energy Storage, Vol. 32, 101930, 2020.

q Investigation of Flow Distribution and Effect of Aspect ratio on Critical Heat Flux in Multiple Parallel Microchannel Flow Boiling, Ayyaz Siddique, Ketan Sakalkale, Sandip K. Saha, Amit Agrawal, Heat and Mass Transfer, 2020. https://doi.org/10.1007/s00231-020-02972-0.

q Thermal Performance Analysis of PCM based Thermal Storage System using a Generalized Numerical Model with Volumetric Expansion and Shrinkage, Diwakar Janghel, Shyamprasad Karagadde, Sandip K. Saha, Applied Thermal Engineering, Vol. 180, 115826, 2020.

q Coupled Temperature-Microstructure Model for Predicting Temperature Distribution and Phase Transformation in Steel for Arbitrary Cooling Curves, Sandip K. Saha, Akhilesh Kumar, ASME J. Thermal Sci. Eng., Vol. 13, 031010-1, 2021.

q Surface Nano-Structure-Wettability Coupling Leads to Unique Topological Evolution Dictating Water Transport Over Nanometer Scales, Prasenjit Dey, Sandip K. Saha, Suman Chakraborty, Langmuir, Vol. 36, 8111-8122, 2020.

q Numerical Study on the Effect of Corrugation Angle on Thermal Performance of Cross Corrugated Plate Heat Exchangers, Sandip K. Saha, Abdul Haaris Khan, Thermal Science and Engineering Progress, Vol. 20, 100711, 2020.

q Thermal-Hydraulic Characteristics of Purge Gas in a Rectangular Packed Pebble Bed of a Fusion Reactor using DEM-CFD and Porous Medium Analyses, Akhalesh Sharma, Abhishek Thakur, Sandip K. Saha, Atul Sharma, Deepak Sharma, Paritosh Chaudhuri, Fusion Engineering and Design, Vol. 160, 111848, 2020.

q Effect of Short Pin Fin with Different Shapes and Arrangements on Thermal Resistance of Micro Heat Sink, Gagan V. Kewalramani, Gaurav Hedau, Sandip K. Saha, Amit Agrawal, Journal of Enhanced Heat Transfer, Vol. 27(6), 491-503, 2020.

q Study of Hot Stress Dynamic IR Thermography for Detecting Surface Cancerous Tissue, Uddip Kashyap, Subhasish Sarkar, Sandip K. Saha, Journal of Medical Engineering & Technology, 2020, DOI: https://doi.org/10.1080/03091902.2020.1772390

q Experimental and Numerical Investigation of the Effect of Number of Parallel Microchannels on Flow Boiling Heat Transfer, Gaurav Hedau, Prasenjit Dey, Rishi Raj, Sandip K. Saha, International Journal of Heat and Mass Transfer, Vol. 158, 119973, 2020.

q Novel Dimension Scaling for Optimal Mass Flow Rate Estimation in Low Temperature Flat Plate Solar Collector based on Thermal Performance Parameters, Rudrodip Majumdar, Sandip K. Saha, Aditya Patki, Thermal Science and Engineering Progress, Vol. 19, 2020, 100569, 2020.

q Enhanced Design of PPE Based on Electrostatic Principle to Eliminate Viruses (SARS_CoV_2), Uddip Kashyap, Sandip K. Saha, INAE Letters, 2020, DOI: https://link.springer.com/article/10.1007/s41403-020-00101-1.

q Experimental and Numerical Study of Effect of Secondary Surfaces Fixed Over Rectangular Vortex Generator with an Overview of Dynamic Mode Decomposition, Uddip Kashyap, Ashish Pawar, Sandip Sarkar, Sandip K. Saha, Physics of Fluids, Vol. 32, 057101, 2020.

q Performance Evaluation of an Open Thermochemical Energy Storage System Integrated with Flat Plate Solar Collector, Ankit Mukherjee, Rudrodip Majumdar, Sandip K. Saha, Chandramouli, Subramaniam, Lalit Kumar, Applied Thermal Engineering, Vol. 173, 115218, 2020.

q Numerical Study on Effect of Secondary Surface on Rectangular Vortex Generator, Uddip Kashyap, Koushik Das, Biplab Kumar Debnath, Upasana Kashyap, Sandip K. Saha, ASME J. Thermal Sci. Eng., Vol. 13(1), 011005, 2021.

q Thermomechanical Characterisations of PTFE, PEEK, PEKK as Encapsulation Materials for Medium Temperature Solar Applications, Rajan Gupta, Shraddha Shinde, Aswani Yella, C. Subramaniam, Sandip K. Saha, Energy, Vol. 194, 116921, 2020.

q Combined Effect of Inlet Restrictor and Nanostructure on Two-Phase Flow Performance of Parallel Microchannel Heat Sinks, Gaurav Hedau, Prasenjit Dey, Rishi Raj, Sandip K. Saha, International Journal of Thermal Sciences, Vol. 153, 106339, 2020.

q Forced Convective Flow and Heat Transfer Past an Unconfined Blunt Headed Cylinder at different Angles of Incidence, Ashish P. Pawar, Sandip Sarkar, Sandip K. Saha, Applied Mathematical Modelling, Vol. 82, pp. 888-915, 2020.

q Experimental and Numerical Study of Latent Heat Thermal Energy Storage with High Porosity Metal Matrix Under Intermittent Heat Load, Ashish Kumar, Sandip K. Saha, Applied Energy, Vol. 263, 114649, 2020.

q Exergetic and Performance Analyses of Two-layered Packed Bed Latent Heat Thermal Energy Storage System, Sandip K. Saha, Rahul B. Das, International Journal of Energy Research, Vol. 44(3), 2208-2225, 2020.

q Air-Water Meniscus Shape in Superhydrophobic Triangular Microgroove is Dictated by a Critical Pressure under Dynamic Conditions, Prasenjit Dey, Sandip K. Saha, Suman Chakraborty, Physics of Fluids, Vol. 31, 102004, 2019.

q Contact Analysis for Contact Thermoforming of PMMA Sheet, Jeet P Patil, Yogesh S. Gaikhe, Vilas Nandedkar, Sushil Mishra, Sandip K. Saha, Materials Performance and Characterization, https://doi.org/10.1520/MPC20190117, 2019.

q Effect of Shrinkage Void on Thermal Performance of Pure and Binary Phase Change Materials Based Thermal Energy Storage System: A Semi-Analytical Approach, Diwakar Janghel, Sandip K. Saha, Shyamprasad Karagadde, Applied Thermal Engineering, Vol. 167, 114706, 2020.

q Effect of Axial Conduction in Integral rough Friction Stir Channels: Experimental Thermo-Hydraulic Characteristics Analyses, Sheetal Pandya, Shubhankar Gurav, Gaurav Hedau, Sandip K. Saha, Amit Arora, Heat and Mass Transfer, https://doi.org/10.1007/s00231-019-02788-7, 2019.

q Experimental and Numerical Study of Thermal Performance of Helical Coil Receiver with Fresnel Lens, Sumit Sharma, Sandip K. Saha, Shireesh B. Kedare, Suneet Singh, Applied Thermal Engineering, Vol. 165, 114608, 2020.

q Confluence of Channel Dimensions and Groove Width Dictates Slippery Hydrodynamics in Grooved Hydrophobic Confinements, Prasenjit Dey, Sandip K. Saha, Suman Chakraborty, Microfluidics and Nanofluidics, Vol. 24, Article number: 23, 2020.

q An Ingenious Fluidic Capacitor for Complete Suppression of Thermal Fluctuations in Two-Phase Microchannel Heat Sinks, Durga Prasad Ghosh, Deepak Sharma, Anurag Kumar, Sandip Kumar Saha, Rishi Raj, International Communications in Heat and Mass Transfer, Vol. 110, 104347, pp. 1-8, 2020.

q Capillary Filling Dynamics of Electromagnetohydrodynamic Flow of Non-Newtonian Fluids, Jeffy John Philip, Joydeb Mukherjee, Sandip Sarkar, Sandip K. Saha, ASME Journal of Fluids Engineering, Vol. 142(4): 041203 (14 pages), 2020.

q Study of Flow Physics of Single-Phase Laminar Flow through Diamond (Diverging-Converging) Microchannel, Goli Sandeep, Sandip K Saha, Amit Agrawal, SN Applied Sciences, Vol. 1, Article number: 1353, 2019.

q Laminar Natural Convection Heat Transfer in Inclined Trapezoidal Enclosure with Isothermally Heated Inner and Side Walls, Sandip K. Saha, ASME J. Thermal Sci. Eng. Appl., Vol. 11(6), pp. 061021 (12 pages), 2019.

q Numerical Investigation of Entropy generation during the Discharging of Encapsulated Phase Change Material based Thermal Energy Storage, Kunal Bhagat, Sandip K. Saha, Heat Transfer Research, 2019.

q A Numerical Approach on Achieving Uniform Thickness Distribution in Pressure Thermoforming, Jeet P. Patil, Vilas Nandedkar, Sandip Saha, Sushil Mishra, Manufacturing Letters, Vol. 21, 24-27, 2019.

q Empirical Correlation of Laminar Forced Convective Flow in Trapezoidal Microchannel based on Experimental and 3D Numerical Study, Gagan V. Kewalramani, Gaurav Hedau, Sandip K. Saha, Amit Agrawal, International Journal of Thermal Sciences, Vol. 142, 422-433, 2019.

q An Investigation of Two-Phase Flow Regimes for Microchannels based on Void Fraction, Ketan Sakalkale, Rudrodip Majumdar, Sandip K. Saha, IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 9(11), 2189- 2199, 2019.

q Transient Performance Analysis of Concentrating Solar Thermal Power Plant with Finned Latent Heat Thermal Energy Storage, Appasaheb Raul, Sandip K. Saha, Mohit Jain, Renewable Energy, Vol. 145, 1957-1971, 2020.

q Effect of Varying Extent of PCM Capsule Filling on Thermal Stratification Performance of a Storage Tank, Rudrodip Majumdar, Sandip K. Saha, Energy, Vol. 178, 1-20, 2019.

q Assessment of Open Thermochemical Energy Storage System Performance for Low Temperature Heating Applications, Ankit Mukherjee, Rudrodip Majumdar, Sandip K. Saha, Lalit Kumar, Chandramouli Subramaniam, Applied Thermal Engineering, Vol. 156, 453-470, 2019.

q Study of Laminar Single Phase Frictional Factor and Nusselt Number in In-line Micro Pin-Fin Heat sink for Electronic Cooling Applications, Gagan V. Kewalramani, Gaurav Hedau, Sandip K. Saha, Amit Agrawal, International Journal of Heat and Mass Transfer, Vol. 138, 796-808, 2019.

q Numerical Study of Thermal Management of Data Centre using Porous Medium Approach, Deep V. Sheth, Sandip K. Saha, Journal of Building Engineering, Vol. 22, 200-215, 2019.

q Microgroove Geometry Dictates Slippery Hydrodynamics on Superhydrophobic Substrates, Prasenjit Dey, Sandip K Saha, Suman Chakraborty, Physics of Fluids, Vol. 30, Physics of Fluids, 122007, 2018.

q Thermohydraulic Characterization of Flow Boiling in a Nanostructured Microchannel Heat Sink with Vapor Venting Manifold, Deepak Sharma, Durga Prasad Ghosh, Sandip K. Saha, Rishi Raj, International Journal of Heat and Mass Transfer, Vol. 130, 1249-1259, 2019.

q Experimental Study on Discharging Performance of Vertical Multitube Shell and Tube Latent Heat Thermal Energy Storage, Appasaheb K. Raul, Pratik Bhavsar, Sandip K. Saha, Journal of Energy Storage, Vol. 20, 279-288, 2018.

q Thermal Performance of Multitube Latent Heat Thermal Storage using Metal Matrix for Solar Applications: A Numerical Study, Shah Rauf, Sandip K Saha, Heat Transfer Research, Vol. 50(6), 545-564, 2019.

q Experimental and Numerical Investigations of Fluid Flow and Heat Transfer in Bioinspired Fish Scale Microchannel, Prasenjit Dey, Gaurav Hedau, Sandip K. Saha, International Journal of Thermal Science, Vol. 135, 44-60, 2019.

q Design and Analysis of PCM Based Radiant Heat Exchanger for Thermal Management of Buildings, Himanshu Garg, Brijesh Pandey, Sandip K. Saha, Suneet Singh, Rangan Banerjee, Energy and Buildings, Vol. 169, 84-96, 2018.

q Experimental Study on the Effect of Low Acute Side Angles on Heat Transfer in Rhombic Shaped Microchannel, Sunil K. Dwivedi, Sandip K. Saha, Journal of Heat Transfer, ASME, Vol. 141(2), 022404, 2018.

q Latent Heat Thermal Storage with Variable Porosity Metal Matrix: A Numerical Study, Ashish Kumar, Sandip K. Saha, Renewable Energy, Vol. 125, 962-973, 2018.

q Quasi-Steady State Moving Boundary Reduced Order Model of Two-Phase Flow for ORC Refrigerant in Solar-Thermal Heat Exchanger, Rudrodip Majumdar, Suneet Singh, Sandip K. Saha, Renewable Energy, Vol. 126, 830-843, 2018.

q Evaluation of Transient Characteristics of Medium Temperature Solar Thermal Systems utilizing Thermal Stratification, Rudrodip Majumdar, Sandip K. Saha, Suneet Singh, Applied Energy, Vol. 224, 69-85, 2018.

q Estimation of Thermal Performance and Design Optimization of Finned Multitube Latent Heat Thermal Energy Storage, Kunal Bhagat, Mohit Pravakar, Sandip K. Saha, Journal of Energy Storage, Vol. 19, 135-144, 2018.

q Mixed Convective Vertically Upward Flow Past Side by Side Square Cylinders at Incidence, Chirag Patel, Sandip Sarkar, Sandip K. Saha, International Journal of Heat and Mass Transfer, Vol. 127, 927-947, 2018.

q Single Phase Laminar Fluid Flow and Heat Transfer in Microchannel with Cylindrical and Parallelepiped Micro-fins, Anil Gorasiya, Sandip K Saha, Heat and Mass Transfer, Vol. 55, 613-626, 2019.

q Modelling and Experimental Study of Latent Heat Thermal Energy Storage with Encapsulated PCMs for Solar Thermal Applications, Appasaheb Raul, Mohit Jain, Swapnil Gaikwad, Sandip K. Saha, Applied Thermal Engineering, Vol. 143, 415-428, 2018.

q Numerical Study of Bubble Growth and Heat Transfer In Microchannel Using Dynamic Contact Angle Models, Ayyaz Siddique, Atul Sharma, Amit Agrawal, Sandip K Saha, Computational Thermal Sciences, 2018, pp. 1667-1685, DOI: 10.1615/ICHMT.2017.CHT-7.1750.

q Comparative Study of Thermal Performance of Parallel Plate and Rectangular Microchannel Counter Flow Heat Exchangers, Sumit Sharma, Sandip K. Saha, Heat Transfer Engineering, Vol. 38, 1404-1414, 2017.

q Heat Transfer Characterization of Rhombic Microchannel for H1 and H2 Boundary Conditions, Sandip K. Saha, Amit Agrawal, Yogesh Soni, International Journal of Thermal Sciences, Vol. 111, 223-233, 2017.

q Dynamic Modelling of ORC-based Solar Thermal Power Plant Integrated with Multitube Shell and Tube Latent Heat Thermal Storage System, Sagar Lakhani, Appasaheb Raul, Sandip K. Saha, Applied Thermal Engineering, Vol. 123, 458-470, 2017.

q Design of Collector Shape for Uniform Flow Distribution in Microchannels, Ayyaz Siddique, Bhaskar J. Medhi, Amit Agrawal, Anugrah Singh, Sandip K. Saha, Journal of Micromechanics and Microengineering, Vol. 27, 075026 (10pp), 2017.

q Heat Transfer Characterization and Optimization of Latent Heat Thermal Storage System Using Fins for Medium Temperature Solar Applications, A. Shinde, S. Arpit, Pramod KM, P.V.C. Rao, S. K. Saha, ASME J. Sol. Energy Eng, Vol. 139, 031003, 2017.

q Flow Over and Mixed Convective Heat Transfer Past a Semi-Circular Cylinder at Incidence with a Tandem Downstream Square Cylinder in Cross Flow, Surendra Singh Sisodia, Sandip Sarkar, Sandip K. Saha, International Journal of Thermal Sciences, Vol. 121, 13-29, 2017.

q Effect of Temperature and Graphite Particle Fillers on Thermal Conductivity and Viscosity of Phase Change Material n-Eicosane, Srilok Srinivasan, Mouhamad S. Diallo, Sandip K. Saha, Opeyemi A. Abass, Aayush Sharma, Ganesh Balasubramanian, International Journal of Heat and Mass Transfer, Vol. 114, 318-323, 2017.

q Modeling of Microchannel Heat Sinks for Electronic Cooling Applications using Volume Averaging Approach, Gagan V. Kewalramani, Amit Agrawal, Sandip K. Saha, International Journal of Heat and Mass Transfer, Vol. 115, 395-409, 2017.

q Facile Fabrication of Nanostructured Microchannels for Flow Boiling Heat Transfer Enhancement, Durga Prasad Ghosh, Deepak Sharma, Diptimoy Mohanty, Sandip K Saha, Rishi Raj, Heat Transfer Engineering, Vol. 40(7), 537-548, 2019.

q Energy and Exergy Analyses of Medium Temperature Latent Heat Thermal Storage with High Porosity Metal Matrix, Ashish Kumar, Sandip K. Saha, Applied Thermal Engineering, Vol. 109, 911-923, 2016.

q Numerical Modelling of Bubble Growth in Microchannel using Level Set Method, Gaurav Katiyar, Shyamprasad Karagadde, Sandip K. Saha, Atul Sharma, International Journal of Heat and Mass Transfer, Vol. 101, 719-732, 2016.

q Effect of Nanofluid Concentration and Composition on Laminar Jet Impinged Cooling of Heated Steel Plate, Manoj K. Singh, Darvik Yadav, Sankalp Arpit, Sourav Mitra, Sandip K. Saha, Applied Thermal Engineering, Vol. 100, 237-246, 2016.

q Numerical Analysis of Latent Heat Thermal Energy Storage using Encapsulated Phase Change Material for Solar Thermal Power Plant, Kunal Bhagat, Sandip K. Saha, Renewable Energy, Vol. 95, 323-336, 2016.

q Performance Analysis of Heat Sinks with Phase Change Materials subjected to Transient and Cyclic Heating, Sandip K. Saha, Pradip Dutta, Heat Transfer Engineering, Vol. 36, 1349-1359, 2015.

q Numerical Study of Horizontal Ground Heat Exchanger for High Energy Demand Applications, Ranjeet R. Dasare, Sandip K. Saha, Applied Thermal Engineering, Vol. 85, pp. 252- 263, 2015.

q A Design Method for Rectangular Microchannel Counter Flow Heat Exchangers, Sandip K. Saha, Martine Baelmans, International Journal of Heat and Mass Transfer, Vol. 74, 1-12, 2014.

q Role of Melt Convection on Optimization of PCM-Based Heat Sink Under Cyclic Heat Load, Sandip K Saha, Pradip Dutta, Heat Transfer Engineering, Vol. 34, 950-958, 2013.

q Thermal Management of Electronics using PCM-based Heat Sink Subjected to Cyclic Heat Load, S. K. Saha, P. Dutta, IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 2, 464-473, 2012.

q Study on Boiling Heat Transfer of Water-TiO₂ and Water-MWCNT Nanofluids based Laminar Jet Impingement on Heated Steel Surface, Sourav Mitra, Sandip K. Saha, Subhrakanti Chakraborty, Sumitesh Das, Applied Thermal Engineering, Vol. 37, 353-359, 2012.

q Effect of Melt Convection on the Optimum Thermal Design of Heat Sinks with Phase Change Material, S. K. Saha, P. Dutta, Journal of Enhanced Heat Transfer, Vol. 18, 249-259, 2011.

q Experimental Characterization of Concentration of Nanofluid by Ultrasonic Technique, Subhrakanti Chakraborty, Sandip K Saha, J. C. Pandey, Sumitesh Das, Powder Technology, Vol. 210, 304-307, 2010.

q Heat Transfer Correlations for PCM-based Heat Sinks with Plate Fins, S. K. Saha, P. Dutta, Applied Thermal Engineering, Vol. 30, 2485-2491, 2010.

q Studies on Optimum Distribution of Fins in Heat Sinks Filled with Phase Change Material, S. K. Saha, K. Srinivasan and P. Dutta, ASME Journal of Heat Transfer, 2008.

q A Numerical Model for Heat Sinks with Phase Change Materials and Thermal Conductivity Enhancers, K. C. Nayak, S. K. Saha, K. Srinivasan and Pradip Dutta, International Journal of Heat and Mass Transfer, Vol. 49, 1833-1844, 2006.

Journal Publications

Conference Proceedings

q Experimental Investigation of Stratified Sensible Thermal Energy Storage Using Silicone Oil, Anas A.E Ahmed, Rudrodip Majumdar, Sandip K. Saha, Paper number: IHMTC-2023–279, Proceedings of the 27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference, December 14-17, 2023, IIT Patna, Patna-801106, Bihar, India.

q Study of Different Flow Configurations of Radial Flow Annular Reactor for Thermochemical Energy Storage, Ankush Shankar Pujari, Rudrodip Majumdar, C. Subramaniam, Sandip K. Saha, Paper number: IHMTC-2023–278, Proceedings of the 27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference, December 14-17, 2023, IIT Patna, Patna-801106, Bihar, India.

q Development and Characterization of a Solid-Solid-Phase Change Material for Low-Temperature Applications, Goutam Nayak, Mayank Maroliya, Mohammed Qadeer, Midhun V.C., Sandip K. Saha, C. Subramaniam, Paper number: IHMTC-2023–325, Proceedings of the 27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference, December 14-17, 2023, IIT Patna, Patna-801106, Bihar, India.

q Numerical Heat Transfer Investigation on Solid-Solid Phase Change Material Composite-Based Plate-Fin Heat Sink for Thermal Management of Electronic Package, Midhun V C, Mayank Maroliya, Sandip Kumar Saha, Paper number: IHMTC-2023–228, Proceedings of the 27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference, December 14-17, 2023, IIT Patna, Patna-801106, Bihar, India.

q Comparative Study of Solid-Solid and Solid-Liquid Phase Change Materials for a Pin-Finned Heat Sink in Avionics Thermal Management, Mayank Maroliya, Midhun V.C., Sandip K. Saha, Paper number: IHMTC-2023–247, Proceedings of the 27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference, December 14-17, 2023, IIT Patna, Patna-801106, Bihar, India.

q Numerical Study of an Improved Mechanical Seal Design by Introducing a Groove, Harpal Singh, Sandip K. Saha, Paper number: IHMTC-2023–229, Proceedings of the 27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference, December 14-17, 2023, IIT Patna, Patna-801106, Bihar, India.

q Numerical Model for Packed Bed Latent Heat Thermal Energy Storage, Akshay Kumar, Sandip K. Saha, 4^th International Conference On Fluid Flow And Thermal Science (ICFFTS 2023), December 7 -9, 2023, Lisbon, Portugal.

q Numerical Simulation on Thermal Management of Concentrating Photovoltaic-Thermal Module with Confined Jet Impingement with Ag-ZnO Hybrid Nanofluids, Abhishek Gupta, Sandesh S. Chougule, Sandip K. Saha, Proceedings of ECOS 2023, 36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 25-30 June, 2023, Las Palmas De Gran Canaria, Spain.

q Variable PCM Density-based Numerical Model for Packed Bed Latent Heat Thermal Energy Storage, Akshay Kumar, Sandip K. Saha, Proceedings of the 4th International Conference on Fluid Flow and Thermal Science (ICFFTS'23), Lisbon, Portugal- December 07 - 09, 2023.

q Modelling of Heat Transfer Including Radiation of Binary Packed Bed, Pratyush Kumar, Sandip Saha, Atul Sharma, 18^th OpenFOAM Workshop, Polytechnic School of the University of Genoa, 11-14 July, 2023, Genoa, Italy.

q Comparative Assessment of Published Models for Equivalent Sand-Grain Roughness Height based on Surface Statistics, Sangram K. Samal, Sandip K. Saha, 8^th Thermal and Fluids Engineering Conference (TFEC), 26-29 March, 2023, University of Maryland, College Park, MD, USA.

q Thermochemical Energy Storage Using Radial Flow Annular Reactor for Attaining Lower Pressure Drop, Ankush Shankar Pujari, Rudrodip Majumdar, Sandip K. Saha, Proceedings of the 8^thWorld Congress on Momentum, Heat and Mass Transfer (MHMT'23), 26-28 March, 2023, Lisbon, Portugal.

q Novel Tree-Branching Microchannel Heat Sink Under Variable and Constant Fluid Volume Approaches, Sangram Kumar Samal, Sandip Kumar Saha, Proceedings of the 9^th International and 49^th National Conference on Fluid Mechanics and Fluid Power (FMFP), 14-16 December, 2022, IIT Roorkee, Roorkee, Uttarakhand, India.

q Flow Characteristics and its Impact on Heat Transfer in Microchannel with Porous Rectangular Vortex Generator, Achintya Kambli, Prasenjit Dey, Sandip Kr. Saha, Proceedings of the 9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP), 14-16 December, 2022, IIT Roorkee, Roorkee, Uttarakhand, India.

q Effect of Porous-Fin on Performance Enhancement of Shell-Tube Latent Heat Thermal Storage System, C. Suresh, Sandip K. Saha, Proceedings of the 9^th International and 49^th National Conference on Fluid Mechanics and Fluid Power (FMFP), 14-16 December, 2022, IIT Roorkee, Roorkee, Uttarakhand, India.

q Effect of Size Ratio on Permeability and Local Packing Fraction of the Binary Packed Bed, Pratyush Kumar, Sandip K. Saha, Atul Sharma, Proceedings of the 9^th International and 49^th National Conference on Fluid Mechanics and Fluid Power (FMFP), 14-16 December, 2022, IIT Roorkee, Roorkee, Uttarakhand, India.

q Flow-Induced Vibration of an Elastically-Mounted Cylinder under the influence of downstream Stationary Cylinder, Abhishek Thakur, Atul Sharma, Sandip K. Saha, Proceedings of the 9^th International and 49^th National Conference on Fluid Mechanics and Fluid Power (FMFP), 14-16 December, 2022, IIT Roorkee, Roorkee, Uttarakhand, India.

q Heat Transfer and Entropy Generation Analysis past a Blunt Headed Cylinder with Corner Modification, Ashish P. Pawar, Sandip Sarkar, Sandip K. Saha, 7^th Thermal and Fluids Engineering Conference (TFEC), University of Nevada, Las Vegas, NV, USA, May 16-18, 2022.

q Rigid Body Simulation and CFD Analysis of Packed Bed Thermal Energy Storage with Cylindrical-Shaped Micro-Encapsulation of Phase Change Material, Akshay Kumar, Hitesh Khurana, Sandip Kumar Saha, 16^th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics and Editorial Board of Applied Thermal Engineering (HEFAT-ATE 2022- virtual), 8-10 August, 2022.

q Formulation of Prediction Model for Working Fluid Temperature in a Vertical Paraboloid-Shaped Thermal Energy Storage Tank During Stand-Alone Operation, Hitesh Khurana, Sandip Kumar Saha, Rudrodip Majumdar, 16^th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics and Editorial Board of Applied Thermal Engineering (HEFAT-ATE 2022- virtual), 8-10 August, 2022.

q Investigation of Effect of Prandtl Number on Heat Transfer and Pressure Drop of Lance & Offset Fin, Rahul Agrawal, K V Ramana Murthy, Sankaraiah Mada, Sandip Kumar Saha, Rajneesh Bhardwaj, 15^th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT), 25-28 July 2021 (Virtual).

q Numerical Investigation on The Performance of The Helical and Conical Coil Heat Exchanger Configurations in The Dynamic Mode of Heat Extraction, Hitesh Khurana, Rudrodip Majumdar, Sandip K Saha, 2^nd International Conference on Recent Advances in Fluid and Thermal Sciences (iCRAFT2020) (Virtual), Department of Mechanical Engineering, Birla Institute of Technology and Science, Dubai Campus, 19-21 March, 2021.

q Effect of Outlet Plenum Volume During Flow Boiling Inside Plain Parallel Microchannel, Gaurav Hedau, Rishi Raj, Sandip K. Saha, 5^th International Conference on Multiphase Flow and Heat Transfer (ICMFHT 20), 14 -16 October 2020 (Virtually).

q Exergy Analysis of Latent Heat Thermal Energy Storage with Variable Porosity Metal Matrix, Ashish Kumar, Sandip K. Saha, Proceedings of International Conference on Energy and Sustainable Development, Jointly organized by Jadavpur University and The Institution of Engineers, India, February 14-15, 2020, India.

q Three Dimensional Numerical Study of Fluidic Diodicity in Asymmetric Diamond Microchannels, Sandeep Goli, Sandip Kumar Saha, Amit Agrawal, 46^th National Conference on Fluid Mechanics and Fluid Power (FMFP-2019), December 9-11, 2019 PSG College of Technology, Coimbatore.

q Study on the Behaviour of Thermal Stratification in Encapsulated PCM based Storage System, Rudrodip Majumdar, Sandip K. Saha, 25^th National and 3^rd International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Roorkee, 28-31, December 2019.

q Three-Dimensional Numerical Study of Single-Phase Laminar Convective Heat Transfer in Diamond Microchannel in the Presence of Conjugate Effect, Goli Sandeep, Sandip K Saha, Amit Agrawal, 25^th National and 3^rd International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Roorkee, 28-31, December, 2019.

q Helicity Density Study of Rectangular Vortex Generator with Secondary Surfaces over It, Uddip Kashyap, Koushik Das, Biplab Kumar Debnath, Upasana Kashyap, Sandip Kumar Saha, 25^th National and 3^rd International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Roorkee, 28-31, December, 2019.

q Modified Numerical Model for Solidification Shrinkage of Phase Change Materials with Large Difference in Phase Specific Heat and Density, Diwakar Janghel, Shyamprasad Karagadde, Sandip K Saha, 25^th National and 3^rd International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Roorkee, 28-31, December, 2019.

q Interfacial Viscous Force: A Significant Aspect of Air-Water Meniscus Shape in Superhydrophobic Microchannel, Prasenjit Dey, Sandip Kumar Saha, Suman Chakraborty, 25^th National and 3^rd International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Roorkee, 28-31, December, 2019.

q Numerical Study of Two Phase Flow Boiling Phenomena in Boiler Tube, Vimal Sain, Sandip K. Saha, 25^th National and 3^rd International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Roorkee, 28-31, December, 2019.

q Experimental Comparison of Thermal Resistance for Micro Pin Fin Heat Sinks with Different Shapes and Arrangements, Gagan V. Kewalramani, Sandip K. Saha, Gaurav Hedau and Amit Agrawal, 25^th National and 3^rd International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Roorkee, 28-31, December, 2019.

q Modeling of Open Thermochemical Energy Storage System for Space Heating using Reduced Order Model, Ankit Mukherjee, Rudrodip Majumdar, Sandip K. Saha, Lalit Kumar, 25^th National and 3^rd International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Roorkee, 28-31, December, 2019.

q Heat Transfer and Entropy Generation Analysis Past an Unconfined Blunt Headed Cylinder at Incidence, Ashish Pawar, Sandip Sarkar, Sandip K. Saha, 25^th National and 3^rd International ISHMT-ASTFE Heat and Mass Transfer Conference, IIT Roorkee, 28-31, December, 2019.

q Modeling of Heat Extraction in Abandoned Oil and Gas Wells, Arjav Shah, Sachchida Nand Pandey, Vikram Vishal, Sandip K. Saha, in Proceedings of 44^th Workshop on Geothermal Reservoir Engineering Stanford University, Stanford, California, February 11-13, 2019.

q Modeling of Heat Extraction from Depleted Oil and Gas Wells for Geothermal Energy Production, Arjav Shah, S. N. Pandey, Vikram Vishal, Sandip K. Saha, AGU Fall Meeting 2018, Walter E. Washington Convention Center, 10-14 December 2018, Washington, D.C.

q Evaluation of Thermal Efficiency of a Simple Waste Heat Recovery-Cum-Seawater Desalination System Coupled with an ORC Cycle, Animesh Singh, Arpit Kedia, Rudrodip Majumdar, Sandip Saha, 7^th International and 45^th National Fluid Mechanics and Fluid Power Conference (FMFP), 10-12 December 2018.

q Study of Shrinkage in Phase Change Material using One-Dimensional Simplified Heat Diffusion Model, Diwakar Janghel, Shyamprasad Karagadde, Sandip Kumar Saha, 7^th International and 45^th National Fluid Mechanics and Fluid Power Conference (FMFP), 10-12 December 2018.

q Quasi-Steady State Reduced Order Moving Boundary Model of ORC Heat Exchanger for Medium Temperature Solar-Thermal Systems, Rudrodip Majumdar, Sandip K. Saha, 2^nd International Conference on Sustainable Energy and Environmental Challenges (SEEC-2018), 1-3, January, 2018, IISc, India.

q Numerical Analysis of Heat Transfer Enhancement in Microchannel with Bioinspired Surface, Prasenjit Dey, Sandip K. Saha, the Fifth International Conference on Computational Methods for Thermal Problems (ThermaComp 2018), July 9-11, 2018, IISc Bangalore.

q Experimental Investigation of Single-Phase Heat Transfer on Scalable Nanostructured Microchannels, D. Behera, D. Mohanty, D. P. Ghosh, S. K. Saha, R. Raj, Proceedings of the 4^th World Congress on Mechanical, Chemical, and Material Engineering (MCM'18), Madrid, Spain, Paper No. HTFF 141, August 16-18, 2018.

q Entropy Generation Analysis in a Bioinspired Microchannel, Prasenjit Dey, Sandip K. Saha, Proceedings of the 4^th World Congress on Mechanical, Chemical, and Material Engineering (MCM'18), Madrid, Spain, Paper No. HTFF 155, August 16-18, 2018.

q Experimental Study of Latent Heat Thermal Energy Storage System for Medium Temperature Solar Applications, Ashish Kumar, Pardeep Shahi, Sandip K Saha, Proceedings of the 4^th World Congress on Mechanical, Chemical, and Material Engineering (MCM'18), Madrid, Spain, Paper No. HTFF 152, August 16-18, 2018.

q Bubble Dynamics Factors of Structured Surfaces with Rectangular Fin Base for New, Low-GWP Refrigerants, Avinash Shaligram, Sandip K. Saha, 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC), December 27-30, 2017, BITS Pilani, Hyderabad, India.

q Numerical Study of Liquid Metal Flow in Tundish with Flow Modifiers, Manas Vasantrao More, Sandip Kumar Saha, Vishal Marje, G. Balachandran, International Conference on Metallurgical Fundamentals and Science (ICMFS), Singapore, January 7-9, 2017.

q Numerical Study of Bubble Growth and Heat Transfer in Microchannel using Dynamic Contact Angle Models, Ayyaz Siddique, Atul Sharma, Amit Agrawal, Sandip K Saha, ICHMT International Symposium on Advances in Computational Heat Transfer, May 28-June 1, 2017, Napoli, Italy.

q Enhanced Thermal Conductivity and Viscosity of Phase Change Material n-Eicosane with Addition of Graphite Nanoparticles, Srilok Srinivasan, Mouhamad Diallo, Sandip Kumar Saha, Opeyemi A Abass, Aayush Sharma, Ganesh Balasubramanian, International Mechanical Engineering Congress & Exposition (IMECE). November 3-9, 2017, Tampa, Florida.

q Application of Dynamic Bubble Departure Model for New, Low-Gwp Refrigerants on Enhanced, Structured Surfaces, Avinash Shaligram, Sandip K. Saha, International Mechanical Engineering Congress & Exposition (IMECE), November 3-9, 2017, Tampa, Florida.

q Reduced Order Model of Encapsulated PCMs based Thermal Energy Storage, Mohit Jain, Appasaheb Raul, Sandip Kumar Saha, 6^th International Conference on Advances in Energy Research (ICAER), December 12-14, 2017, IIT Bombay, India.

q Effect of Nanostructured Microchannel on Flow Boiling Instability, Gaurav Hedau, Durga Prasad Ghosh, Deepak Sharma, Alwin Varghese, Rishi Raj, Sandip K Saha, 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC), December 27-30, 2017, BITS Pilani, Hyderabad, India.

q Modeling and Simulation of Solar Thermal Power Plant with Finned Latent Heat Thermal Energy Storage System, Appasaheb Raul, Mohit Jain, Sandip K. Saha, 24^th National and 2^nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC), December 27-30, 2017, BITS Pilani, Hyderabad, India.

q Numerical Study of Micro Heat Sinks with Different Types of Fins, Gagan V. Kewalramani, Gauhar Bains, Sandip K. Saha, 24^th National and 2^nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC), December 27-30, 2017, BITS Pilani, Hyderabad, India.

q Numerical Analysis of Latent Heat Thermal Storage with Variable Porosity Metal Matrix, Ashish Kumar, Sandip K. Saha, 24^th National and 2^nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC), December 27-30, 2017, BITS Pilani, Hyderabad, India.

q Numerical Study of Mixed Convective Flow and Heat Transfer characteristics past Side-by-Side Square Cylinders at Incidence, Chirag Patel, Sandip Sarkar, Sandip K. Saha, 6^th International and 43^rd National Conference on Fluid Mechanics and Fluid Power (FMFP-2016), December 15-17, 2016 at MNNITA, Allahabad, India.

q Enhancement of Flow Boiling Heat Transfer via Suppression of Pressure Drop Fluctuations in Nanostructured Microchannels, Durga Prasad Ghosh, Deepak Sharma, Rishi Raj, Sandip Kumar Saha, 6^th International and 43^rd National Conference on Fluid Mechanics and Fluid Power (FMFP-2016), December 15-17, 2016 at MNNITA, Allahabad, India.

q Flow Boiling in Microchannels: Experimental Study of Heat Transfer and Pressure Drop, Deepak Sharma, Durga Prasad Ghosh, Rishi Raj, Sandip Kumar Saha, 6^th International and 43^rd National Conference on Fluid Mechanics and Fluid Power (FMFP-2016), December 15-17, 2016 at MNNITA, Allahabad, India.

q Enhanced Thermal Properties of n-Eicosane Phase Change Material with Nanoparticle Dispersions, Mouhamad Said Diallo, Opeyemi Abass, Srilok Srinivasan, Aayush Sharma, Sandip Kumar Saha, Ganesh Balasubramanian, Materials Research Society, November 27-December 2, 2016, Boston, Massachusetts, USA.

q Heat Transfer Characterization of Latent Heat Thermal Energy Storage System using Fins in Solar Thermal Power Plant, Mohit Prabhakar, Suneet Singh, Sandip Kumar Saha, SASEC 2015, May 11-13, 2015.

q Numerical Simulation of Latent Heat Thermal Storage using Metal Matrix and Foam for Solar Thermal Power Plant, Saurav Halder, Suneet Singh, Sandip Kumar Saha, SASEC 2015, May 11-13, 2015.

q Effect of Geometrical Parameters of Fin on The Thermal Performance of Latent Heat Thermal Energy Storage System in Solar Thermal Power Plant, M Prabhakar, S Singh, S K Saha, International Seminar on Renewable Energy and Sustainable Development, 2015 (RESD), June 15-17, 2015, Thimpu, Bhutan.

q Numerical Study of Latent Heat Storage System for ORC-based Solar Thermal Power Plant for Extension of Electricity Generation, Asmita Shinde, Sandip K Saha, International Conference on Advances in Energy Research 2015, December 15-17, 2015, Indian Institute of Technology Bombay, India.

q Numerical Study of Thermal Storage using Encapsulated Phase Change Material for Solar Thermal Power Plant, Kunal Bhagat, Sandip K Saha, International Conference on Advances in Energy Research 2015, December 15-17, 2015, Indian Institute of Technology Bombay, India.

q Second Law Analysis of Latent Heat Thermal Storage for ORC-based Solar Thermal Power Plant, Ashish Kumar, Sandip K Saha, International Conference on Advances in Energy Research 2015, December 15-17, 2015, Indian Institute of Technology Bombay, India.

q Fabrication of Nanostructured Microchannels for Enhancement of Single and Multiphase Heat Transfer, Durga Prasad Ghosh, Diptimoy Mohanty, Sandip Kumar Saha, Rishi Raj, 23^rd National Heat and Mass Transfer Conference and 1^st International ISHMT-ASTFE Heat and Mass Transfer Conference, December 17-20, 2015, Thiruvananthapuram, India.

q Mixed Convection Past a Semi-Circular Cylinder at Incidence with A Tandem Downstream Square Cylinder in Cross Flow, Surendra Singh Sisodia, Sandip Sarkar, Sandip K. Saha, 23^rd National Heat and Mass Transfer Conference and 1^st International ISHMT-ASTFE Heat and Mass Transfer Conference, December 17-20, 2015, Thiruvananthapuram, India.

q Effect of Water-TiO₂ Nanofluid Concentration on the Cooling of Heated Steel Surface using Laminar Jet Impingement, S. Mitra, S. Chakraborty, S. Das, M. K. Singh, S. K. Saha, 22^nd National and 11^th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013 at Indian Institute of Technology Kharagpur, India.

q Performance Analysis of Parallel Plate and Rectangular Microchannel Counter Flow Heat Exchangers, Sandip K Saha, Sumit Sharma, Martine Baelmans, 22^nd National and 11^th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013 at Indian Institute of Technology Kharagpur, India.

q Optimization of PCM-based Heat Sink under Cyclic Heat Load, Sandip K. Saha, Pradip Dutta, 20^th National and 9^th ISHMT/ASME Heat and Mass Transfer Conference, January 4-6, 2010 at Indian Institute of Technology- Bombay, India.

q Cooling of Electronics with Phase Change Materials, S. K. Saha, P. Dutta, International Conference on Modelling, Optimisation and Computing (ICMOC 2010), October 28-30, 2010, National Institute of Technology Durgapur, INDIA.

q Design and Installation of Wet HNx Injection System in the Continuous Galvanizing Line for Better Snout Atmosphere Control, A Banerjee, Bipul Jeet, S K Saha, Sambit Beborta, 48^th National Metallurgist Day (NMD) and the 64^th Annual Technical Meeting (ATM) of Indian Institute of Metals, November 14-16, 2010, National Science Seminar Complex of the Indian Institute of Science, INDIA.

q Performance of PCM-based Heat Sinks subjected to Cyclic Heat Load, S. K. Saha, P. Dutta, International Symposium on Innovative Materials for Processes in Energy Systems (IMPRES2010), 29^th November- 1^st December, 2010, Singapore.

q A Combined CFD and Flow Network Modelling Approach for Vehicle Underhood Air Flow and Thermal Analysis, Vivek Kumar, Sangeet Kapoor, Gyan Arora, Sandip K. Saha, Pradip Dutta, April 20-23, 2009, SAE World Congress 2009, Detroit, Michigan, USA.

q Cooling of Electronics using Phase Change Materials under Cyclic Loading, S. K. Saha, B. B. Murthy, P. Dutta, 19^th National and 8^th ISHMT/ASME Heat and Mass Transfer Conference, January 3-5, 2008 at JNTU- Hyderabad, India.

q Role of Melt Convection on the Thermal Performance of Heat Sinks with Phase Change Material, S. K. Saha, P. Dutta, December 9-12, 2008, EPTC 2008, Singapore.

q Cooling of Electronics using Phase Change Materials and Thermal Conductivity Enhancers, S. Saha, K.C. Nayak, K. Srinivasan and Pradip Dutta, 18^th National and 7^th ISHMT/ASME Heat and Mass Transfer Conference, January 4-6, 2006 at Indian Institute of Technology- Guwahati, India.